Introduction of UNS N08825（Incoloy 825）
Tech Center 2025-09-05 65
Incoloy 825 alloy is a nickel-iron-chromium alloy with added molybdenum, copper and titanium. Designed to offer excellent resistance to many corrosive environments. The nickel content is sufficient to resist chloride ion stress corrosion cracking. The combination of nickel with molybdenum and copper also provides excellent resistance to reducing environmen…
Introduction of UNS S35045（Incoloy 803）
Tech Center 2025-09-05 69
Incoloy 803 is an iron-nickel-chromium alloy designed for petrochemical, chemical and thermal processing applications. The nickel and chromium content of Incoloy 803 is higher than that of Incoloy 800H and 800HT. The ratio of nickel, iron and chromium is balanced, providing optimal performance within the temperature range of 1550°F(840 ° C) to 2100 °F(1150…
Introduction of UNS N08811（Incoloy800HT）
Tech Center 2025-09-03 77
Incoloy 800HT is a fully austenitic low-carbon nickel-iron-chromium alloy of the same series as Incoloy800. The cobalt content in this alloy can be strictly controlled below 0.01%. The Incoloy800HT can resist corrosion from many corrosive media. Its relatively high nickel content endows it with excellent resistance to stress corrosion cracking under water-…
Introduction of UNS N08810（Incoloy800H）
Tech Center 2025-09-02 69
Nickel-iron-chromium alloy, compared with Incoloy 800, has the same matrix composition but significantly higher creep strength. The higher strength stems from the strict control of the contents of C, AI and Ti, along with the combined effect of heat treatment. Used in petrochemical processes, heater and reheater pipeline systems in power plants, industrial…
Introduction of UNS N08800（Incoloy800）
Tech Center 2025-09-02 42
Incoloy800(UNS N08800/ W.N.1.4876) is a widely used material for the construction of equipment that requires corrosion resistance, heat resistance, strength and stability, with a service temperature up to 1500 ° F(816 ° C). Alloy 800 has general corrosion resistance to many aqueous media and, due to its nickel content, can resist stress corrosion cracking.…
Introduction of UNS N06985（Inconel G-3）
Tech Center 2025-08-30 44
Inconel G-3 is a nickel-chromium-iron alloy with molybdenum and copper added. The control of some minor elements can enhance the resistance to heat-affected zone (HAZ) corrosion and improve the welding performance. Alloy G-3 has excellent corrosion resistance to oxidizing chemicals and atmospheres. Due to its nickel and copper content, it is also resistant…
Introduction of W.Nr.2.4819（Inconel C-276）
Tech Center 2025-08-30 65
Overview of C276C276 is an improved ultra-low carbon Ni-Mo-Cr series nickel-based corrosion-resistant alloy, which has excellent corrosion resistance and stress corrosion cracking resistance to various strong corrosive and chemical media. Currently, it is widely used in aviation, chemical industry, power plant desulfurization and other fields. Based on the…
Introduction of UNS R30783（Inconel783）
Tech Center 2025-08-29 47
Inconel783 is an oxidation-resistant, low-expansion nickel-cobalt-iron alloy with added aluminum, chromium and niobium. This new type of alloy is of great interest to aircraft gas turbine engine designers and materials engineers, and can be used for sealing and gap control of components such as rings, casings, shields and seals in compressors, turbines and…
Introduction of UNS N07751（Inconel751）
Tech Center 2025-08-29 61
Inconel 751 is a precipitation-hardening nickel-chromium alloy, mainly used in the exhaust valves of internal combustion engines. This alloy basically has the same excellent physical, mechanical and corrosion resistance properties as Inconel X-750.In the evaluation of the application materials for exhaust valves, alloy 751 performed outstandingly in the le…
Introduction of UNS N07750（InconelX-750）
Tech Center 2025-08-28 168
Inconel X-750 is a precipitation-hardening nickel-chromium alloy that is used for its corrosion resistance, oxidation resistance and high strength up to 1300°F. Although the effect of precipitation hardening will be greatly reduced when the temperature exceeds 1300°F, the heat-treated material still has useful strength at 1800°F. The Inconel X-750 also has…
Introduction of UNS N07740（Inconel740H）
Tech Center 2025-08-27 53
Inconel 740H is a nickel-based precipitation-hardening superalloy that offers a unique combination of high strength and creep resistance at high temperatures, while also having resistance to coal ash corrosion. The initial target of this alloy was to be used as A-USC boiler tubes in the superheated sections of these factories, but it was later changed to b…
Introduction of N07725（Inconel725）
Tech Center 2025-08-27 44
Inconel725 is a nickel-chromium-molybdenum-niobium alloy with extremely high corrosion resistance and can achieve extremely high strength through age hardening. It basically has the same corrosion resistance as Inconel625, which is widely used in various extremely corrosive environments. The strength of age-hardened Inconel725 is approximately twice that o…